<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor CAD [Engine build 7996] [<64-Bit>]  -->
<ImplantLibraryEntry xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <AxisAsymmetric>
    <x>0</x>
    <y>1</y>
    <z>0</z>
  </AxisAsymmetric>
  <DisplayInformation>NTA Implant</DisplayInformation>
  <Keyword>NTA_Implant_plan</Keyword>
  <ReferenceRotationOffset>0</ReferenceRotationOffset>
  <RotationLockCount>6</RotationLockCount>
  <LibraryType>Implant</LibraryType>
  <Supplier>NTA Implant</Supplier>
  <SupplierLink>https://www.pilatusswiss.ch/</SupplierLink>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <SoftwareVersionConstraint>
    <OnlyForImplantPlanning>false</OnlyForImplantPlanning>
    <EngineBuildInterval>
      <MinEngineBuild>6389</MinEngineBuild>
    </EngineBuildInterval>
  </SoftwareVersionConstraint>
  <TypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>O 3.4 mm Narrow</DisplayInformation>
      <Keyword>34mm</Keyword>
      <ImplantDrillChannelDiameter>3.4</ImplantDrillChannelDiameter>
      <ImplantBodyDiameter>3.4</ImplantBodyDiameter>
      <ImplantPlatformDiameter>3.4</ImplantPlatformDiameter>
      <ImplantConnection>
        <ID>NTA_P21-N</ID>
      </ImplantConnection>
      <BoneHeightOffset>0</BoneHeightOffset>
      <ReferenceHeightOffset>0</ReferenceHeightOffset>
      <ReferenceColor>#FF8000</ReferenceColor>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>8.5 mm</DisplayInformation>
          <Keyword>085mm</Keyword>
          <ImplantLength>8.5</ImplantLength>
          <ImplantDummyObjectFilename>O-NTF3408S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-NTF3408S</ImplantID>
          <ImplantForImplantPlanningFilename>O-NTF3408S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>10 mm</DisplayInformation>
          <Keyword>105mm</Keyword>
          <ImplantLength>10</ImplantLength>
          <ImplantDummyObjectFilename>O-NTF3410S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-NTF3410S</ImplantID>
          <ImplantForImplantPlanningFilename>O-NTF3410S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>11.5 mm</DisplayInformation>
          <Keyword>115mm</Keyword>
          <ImplantLength>11.5</ImplantLength>
          <ImplantDummyObjectFilename>O-NTF3411S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-NTF3411S</ImplantID>
          <ImplantForImplantPlanningFilename>O-NTF3411S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>13 mm</DisplayInformation>
          <Keyword>135mm</Keyword>
          <ImplantLength>13</ImplantLength>
          <ImplantDummyObjectFilename>O-NTF3413S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-NTF3413S</ImplantID>
          <ImplantForImplantPlanningFilename>O-NTF3413S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>15 mm</DisplayInformation>
          <Keyword>155mm</Keyword>
          <ImplantLength>15</ImplantLength>
          <ImplantDummyObjectFilename>O-NTF3415S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-NTF3415S</ImplantID>
          <ImplantForImplantPlanningFilename>O-NTF3415S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>O 3.7 mm Regular</DisplayInformation>
      <Keyword>37mm</Keyword>
      <ImplantDrillChannelDiameter>3.7</ImplantDrillChannelDiameter>
      <ImplantBodyDiameter>3.7</ImplantBodyDiameter>
      <ImplantPlatformDiameter>3.66</ImplantPlatformDiameter>
      <ImplantConnection>
        <ID>NTA_P25-R</ID>
      </ImplantConnection>
      <BoneHeightOffset>0</BoneHeightOffset>
      <ReferenceHeightOffset>0</ReferenceHeightOffset>
      <ReferenceColor>Yellow</ReferenceColor>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>7.5 mm</DisplayInformation>
          <Keyword>075mm</Keyword>
          <ImplantLength>7.5</ImplantLength>
          <ImplantDummyObjectFilename>O-NTF3707S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-NTF3707S</ImplantID>
          <ImplantForImplantPlanningFilename>O-NTF3707S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>8.5 mm</DisplayInformation>
          <Keyword>085mm</Keyword>
          <ImplantLength>8.5</ImplantLength>
          <ImplantDummyObjectFilename>O-NTF3708S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-NTF3708S</ImplantID>
          <ImplantForImplantPlanningFilename>O-NTF3708S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>10 mm</DisplayInformation>
          <Keyword>105mm</Keyword>
          <ImplantLength>10</ImplantLength>
          <ImplantDummyObjectFilename>O-NTF3710S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-NTF3710S</ImplantID>
          <ImplantForImplantPlanningFilename>O-NTF3710S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>11.5 mm</DisplayInformation>
          <Keyword>115mm</Keyword>
          <ImplantLength>11.5</ImplantLength>
          <ImplantDummyObjectFilename>O-NTF3711S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-NTF3711S</ImplantID>
          <ImplantForImplantPlanningFilename>O-NTF3711S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>13 mm</DisplayInformation>
          <Keyword>135mm</Keyword>
          <ImplantLength>13</ImplantLength>
          <ImplantDummyObjectFilename>O-NTF3713S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-NTF3713S</ImplantID>
          <ImplantForImplantPlanningFilename>O-NTF3713S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>15 mm</DisplayInformation>
          <Keyword>155mm</Keyword>
          <ImplantLength>15</ImplantLength>
          <ImplantDummyObjectFilename>O-NTF3715S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-NTF3715S</ImplantID>
          <ImplantForImplantPlanningFilename>O-NTF3715S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>O 4.2 mm Regular</DisplayInformation>
      <Keyword>42mm</Keyword>
      <ImplantDrillChannelDiameter>4.2</ImplantDrillChannelDiameter>
      <ImplantBodyDiameter>4.2</ImplantBodyDiameter>
      <ImplantPlatformDiameter>3.81</ImplantPlatformDiameter>
      <ImplantConnection>
        <ID>NTA_P25-R</ID>
      </ImplantConnection>
      <BoneHeightOffset>0</BoneHeightOffset>
      <ReferenceHeightOffset>0</ReferenceHeightOffset>
      <ReferenceColor>Lime</ReferenceColor>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>7.5 mm</DisplayInformation>
          <Keyword>075mm</Keyword>
          <ImplantLength>7.5</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4007S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4007S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4007S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>8.5 mm</DisplayInformation>
          <Keyword>085mm</Keyword>
          <ImplantLength>8.5</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4008S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4008S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4008S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>10 mm</DisplayInformation>
          <Keyword>105mm</Keyword>
          <ImplantLength>10</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4010S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4010S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4010S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>11.5 mm</DisplayInformation>
          <Keyword>115mm</Keyword>
          <ImplantLength>11.5</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4011S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4011S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4011S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>13 mm</DisplayInformation>
          <Keyword>135mm</Keyword>
          <ImplantLength>13</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4013S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4013S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4013S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>15 mm</DisplayInformation>
          <Keyword>155mm</Keyword>
          <ImplantLength>15</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4015S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4015S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4015S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>O 4.6 mm Regular</DisplayInformation>
      <Keyword>46mm</Keyword>
      <ImplantDrillChannelDiameter>4.6</ImplantDrillChannelDiameter>
      <ImplantBodyDiameter>4.6</ImplantBodyDiameter>
      <ImplantPlatformDiameter>3.81</ImplantPlatformDiameter>
      <ImplantConnection>
        <ID>NTA_P25-R</ID>
      </ImplantConnection>
      <BoneHeightOffset>0</BoneHeightOffset>
      <ReferenceHeightOffset>0</ReferenceHeightOffset>
      <ReferenceColor>Blue</ReferenceColor>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>6.6 mm</DisplayInformation>
          <Keyword>065mm</Keyword>
          <ImplantLength>6.6</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4506S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4506S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4506S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>7.5 mm</DisplayInformation>
          <Keyword>075mm</Keyword>
          <ImplantLength>7.5</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4507S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4507S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4507S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>8.5 mm</DisplayInformation>
          <Keyword>085mm</Keyword>
          <ImplantLength>8.5</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4508S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4508S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4508S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>10 mm</DisplayInformation>
          <Keyword>105mm</Keyword>
          <ImplantLength>10</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4510S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4510S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4510S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>11.5 mm</DisplayInformation>
          <Keyword>115mm</Keyword>
          <ImplantLength>11.5</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4511S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4511S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4511S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>13 mm</DisplayInformation>
          <Keyword>135mm</Keyword>
          <ImplantLength>13</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4513S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4513S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4513S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>15 mm</DisplayInformation>
          <Keyword>155mm</Keyword>
          <ImplantLength>15</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM4515S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM4515S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM4515S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>O 5.1 mm Regular</DisplayInformation>
      <Keyword>51mm</Keyword>
      <ImplantDrillChannelDiameter>5.1</ImplantDrillChannelDiameter>
      <ImplantBodyDiameter>5.1</ImplantBodyDiameter>
      <ImplantPlatformDiameter>4.35</ImplantPlatformDiameter>
      <ImplantConnection>
        <ID>NTA_P25-R</ID>
      </ImplantConnection>
      <BoneHeightOffset>0</BoneHeightOffset>
      <ReferenceHeightOffset>0</ReferenceHeightOffset>
      <ReferenceColor>Magenta</ReferenceColor>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>6.6 mm</DisplayInformation>
          <Keyword>065mm</Keyword>
          <ImplantLength>6.6</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM5006S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM5006S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM5006S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>7.5 mm</DisplayInformation>
          <Keyword>075mm</Keyword>
          <ImplantLength>7.5</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM5007S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM5007S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM5007S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>8.5 mm</DisplayInformation>
          <Keyword>085mm</Keyword>
          <ImplantLength>8.5</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM5008S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM5008S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM5008S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>10 mm</DisplayInformation>
          <Keyword>105mm</Keyword>
          <ImplantLength>10</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM5010S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM5010S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM5010S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>11.5 mm</DisplayInformation>
          <Keyword>115mm</Keyword>
          <ImplantLength>11.5</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM5011S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM5011S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM5011S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>13 mm</DisplayInformation>
          <Keyword>135mm</Keyword>
          <ImplantLength>13</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM5013S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM5013S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM5013S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>15 mm</DisplayInformation>
          <Keyword>155mm</Keyword>
          <ImplantLength>15</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM5015S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM5015S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM5015S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <DisplayInformation>O 6.0 mm Regular</DisplayInformation>
      <Keyword>60mm</Keyword>
      <ImplantDrillChannelDiameter>6</ImplantDrillChannelDiameter>
      <ImplantBodyDiameter>6</ImplantBodyDiameter>
      <ImplantPlatformDiameter>4.26</ImplantPlatformDiameter>
      <ImplantConnection>
        <ID>NTA_P25-R</ID>
      </ImplantConnection>
      <BoneHeightOffset>0</BoneHeightOffset>
      <ReferenceHeightOffset>0</ReferenceHeightOffset>
      <ReferenceColor>Cyan</ReferenceColor>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>6.6 mm</DisplayInformation>
          <Keyword>065mm</Keyword>
          <ImplantLength>6.6</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM6006S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM6006S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM6006S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>7.5 mm</DisplayInformation>
          <Keyword>075mm</Keyword>
          <ImplantLength>7.5</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM6007S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM6007S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM6007S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>8.5 mm</DisplayInformation>
          <Keyword>085mm</Keyword>
          <ImplantLength>8.5</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM6008S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM6008S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM6008S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>10 mm</DisplayInformation>
          <Keyword>105mm</Keyword>
          <ImplantLength>10</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM6010S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM6010S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM6010S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>11.5 mm</DisplayInformation>
          <Keyword>115mm</Keyword>
          <ImplantLength>11.5</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM6011S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM6011S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM6011S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <DisplayInformation>13 mm</DisplayInformation>
          <Keyword>135mm</Keyword>
          <ImplantLength>13</ImplantLength>
          <ImplantDummyObjectFilename>O-FNM6013S_dummy.stl</ImplantDummyObjectFilename>
          <ImplantID>O-FNM6013S</ImplantID>
          <ImplantForImplantPlanningFilename>O-FNM6013S.stl</ImplantForImplantPlanningFilename>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <InfoSignature>Not yet signed</InfoSignature>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename />
      <Signature />
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>